360 Stabilizer for Minn Kota Ultrex Quest – Precision Sonar & Outdoors
Tired of your expensive 360 transducer bouncing while your running down the lake or while your rolling down the road? Fix that with our 360 Stabilizer Bracket! A bushing on the inside of the bracket allows the trolling motor to spin freely while supporting the 360 transducer. **If you have another transducer cable and
Tired of your expensive 360 transducer bouncing while your running down the lake or while your rolling down the road? Fix that with our 360 Stabilizer Bracket! A bushing on the inside of the bracket allows the trolling motor to spin freely while supporting the 360 transducer.
**If you have another transducer cable and/or Hydrowave cable running down the shaft of your trolling motor, you can align that cable in the groove on the shaft and the stabilizer bracket will hold that in place**
**If your transducer cable is too large in diameter or you are running multiple cables, you can run the cables on the outside of the bracket and leave enough slack for the cables to turn with the trolling motor shaft**
**This bracket will fit for mounting the 360 to the Quest by itself or with Targetlock.**
**This is for the Ultrex Quest Model ONLY. Will not fit Non Quest model.
A Precision Sonar Cable Keeper is designed to protect trolling motor transducer cables. The transducer cable protector prevents cables from falling between the motor and base, which could cause them to be pinched and cut.
Precision Sonar Cable Keeper | Force | FishUSA
Fortrex MKA-50 Bow Mount Stabilizer Kit The MKA-50 Fortrex Bow-Mount Stabilizer Kit reduces motor bouncing when in stowed position. It can be attaches to the left or right side of bowguard. It will pivot into vertical position and rest on the boat deck when motor is stowed. Also rotates in the horizontal position with bowguard when the motor is deployed. Stainless steel hardware was tested for saltwater use. Includes a rubber bumper to protect deck finish.
Minn Kota - MKA-50 Bow Mount Stabilizer Kit (Fortrex)
360 Stabilizer Bracket for Ultrex – Precision Sonar & Outdoors
Made in the USA! The Ninja Grass Blade is a small aluminum attachment on your trolling motor that has a cutting surface. Every time the trolling motor prop picks up any grass it will run the grass across the cutting surface and chop it into small shreds to make sure your prop keeps spinning even in the thicket grass!.
Precision Sonar Ninja Grass Blade for Lowrance Ghost
Fortrex MKA-50 Bow Mount Stabilizer Kit The MKA-50 Fortrex Bow-Mount Stabilizer Kit reduces motor bouncing when in stowed position. It can be attaches to the left or right side of bowguard. It will pivot into vertical position and rest on the boat deck when motor is stowed. Also rotates in the horizontal position with bowguard when the motor is deployed. Stainless steel hardware was tested for saltwater use. Includes a rubber bumper to protect deck finish.
Minn Kota - MKA-50 Bow Mount Stabilizer Kit (Fortrex)
HELIX 12 CHIRP MEGA DI+ GPS G4N CHO and MEGA 360 Imaging - Ultrex
A Precision Sonar Cable Keeper is designed to protect trolling motor transducer cables. The transducer cable protector prevents cables from falling between the motor and base, which could cause them to be pinched and cut.
Precision Sonar Cable Keeper | Ultrex | FishUSA
360 Stabilizer attaches to Humminbird 360 on a Minnkota Ultrex
BFE Minn Kota Ultrex Mega 360 Stabilizer / Support Bracket
Minn Kota 1368920 Ultrex Quest 90/115 lb. Thrust, 45
Tired of your expensive Humminbird 360 Imaging Transducer bouncing around while you’re running down the lake and driving down the road? Precision
Precision Sonar 360 Stabilizer Bracket Ultrex
DuraSafe Trolling Motor Lock for Minnkota Ultrex – Precision Sonar