Home plastic nylon

NYLON ROD – KRISHNA ALL PLASTIC

$ 44.99

4.7

(224)

In stock

Description

NYLON ROD DIA - 12MM TO 250MM LENGHT - 300MM, 1000MM(1 MTR), 1200MM COLOR - WHITE

NYLON ROD
DIA = 12MM TO 250MM
LENGTH = 300MM, 1000MM(1 MTR), 1200MM
COLOR = WHITE

Best Quality very solid Nylon rod at all size dia and length to use ll industries.

Nylon 6 Rod is definitely our most popular engineering plastic; it has been around for years and has been given many different trade names over the years by various companies. It has become a plastic that because of it's versatility is specified, it seems, for just about everything.

Different types of Nylon 6 rod :

Both manufacturing processes have their advantages but the few more important ones for engineers are:

Extruded Nylon 6 Rod is slightly cheaper and available in diameters ranging from 6mm up to 300mm. Engineers report through that it seems softer and not as easy to machine as it seems more susceptible to melting during machining. Extruded Nylon 6 Rod though has the advantage in terms of it's size range and lack of any blow holes, but due to the extrusion process could possess more internal stress.

Cast Nylon 6 Rod is reportedly more easy to machine with less internal stress due to the manufacturing process, although rare it has the minute potential for blow holes. Cast Nylon 6 Rod seems to be more stable though with a lower internal stress.

Drilling Nylon 6 rod :

Drilling of larger diameter cast Nylon 6 Rod presents some hazards, due to the potential of heat and vibration build-up, it most be drilled with caution. It must be drilled using very sharp drills and gradually working up using successively incremental drill sizes until the desired size is achieved. Coolant and a pecking action is also essential. Using large blunt drills with little attention to heat or vibration build-up has potential to cause the material to crack.

Different colours and grades of Nylon 6 rod :

The majority of Nylon 6 Rod is manufactured in black or natural colours. The black not only looks better in industrial environments but often contains an additive called Molybdenumdisylphide. (MOS2) This is a graphite type self lubricant that helps black Nylon 6 Rod last longer in wear or abrasive conditions.

Uses for Nylon 6 rod :

Nylon 6 Rod can often be found being used for pulleys, bearings, rollers and gears etc. This is because Nylon 6 Rod is exceptionally strong. It can withstand forces up to 1 tonne per square inch as well as being very impact resistant, hard wearing and low in friction.

Water absorption of Nylon 6 rod :

A feature of all Nylon 6 Rod is that it can absorb moisture which could mean that components could grow in size if in a damp environment. This is only a factor if the finished component are exposed to operate in extremely tight tolerances.